For over 30 years, Millwood Specialty Flooring has been manufactured in the foothills of the Appalachian Mountains or North Georgia. This unstained oak hardwood is recognized as being some of the highest quality true hardwood flooring available.
The Millwood Specialty Flooring collections at ACWG are:
Millwood Number One Common
A collection of red and white oak flooring. These come in random lengths of 12 to 30 inches with the average length of the plank of 30 inchs. They are available in 4 different widths of 2.25 inch, 3.25 inch, 4 inch and 5 inch plank. The white oak has a warm almost toasty appearance that is sure to match every decor and the red oak has a unique look that you have to see to believe!
Millwood Number Two Common
This collection continues the use of red and white oak varieties of hardwood. Slightly weathered but just enough to give it character with plenty of knots and grain variations. These are solid hardwood planks with a matched tongue and groove end. As with the other plank flooring from Millwood Specialty Flooring these will need to be installed with nails or staples. The average length of this plank is 24 inches and these range from 2.25 inches to 5 inches in width depending on which you choose.
Millwood Number Three Common
This collection has red and white oaks that have a reclaimed and weathered look. Very appealing and would look fantastic in any rustic decor home or office! Planks will have plenty of “nature’s marks” including open and closed knots, mineral streaks, and wide variation in color and grain. The red oak in this Millwood Specialty Flooring collection has natural features and a warm tone in the planks that makes it especially attractive.
Millwood Select and Better
This is the traditional hardwood plank collection from Millwood Specialty Flooring. The fine color and graining on these red and white oak plank is very evident and almost completely free of blemishes like knots or mineral streaks. Even with no stain on the hardwood plank you can really see the qualities of their oaken faces, so when you add stain you will really accentuate it! The planks in this collection are an average 36 inch length and vary from 12 to 84 inches.
Quality is the number one goal at Millwood Specialty Flooring. Lumber used in their facility is carefully selected from kiln dried lumber sources to the exact standards of moisture content needed to assure lasting quality.
Millwood boards are then carefully milled to create ready to finish, 3/4″ thick flooring strips in widths of 2-1/4″, 3-1/4″, 4″ and 5″ plank all with precise tongue and groove configuration for easy installation. All boards are then graded according to the natural characteristics of their appearance and all Millwood Specialty Flooring is produced and graded according to NWFA (National Wood Flooring Assn) Certified Grade Standards.
There is a lot to consider when looking to purchase hardwood plank from the Millwood Specialty Flooring collections. Since these floors are true hardwoods that are “unfinished” there will be variations in color and imperfections to be considered. Floortalk recommends speaking with a flooring professional before making an initial purchase. By calling the pros at American Carpet Wholesalers you can discuss your choice with someone who has seen the flooring and has firsthand experience with it. You also ensure that you get your best pricing by calling. Give them a call today at 1-800-548-2706.